Glimnix LordoSet — Section 1 (Improved)
Glimnix LordoSet — Lumbar Lordosis Maintenance System shown positioned in a desk chair
Glimnix

LordoSet

Lumbar Lordosis Maintenance System

When it operates Working hours — passive, continuous, no session required

Eight or more hours of sitting, with nothing managing what accumulates. LordoSet maintains the lumbar curve through those hours. The VerteSync Pro addresses what remains at the end of the day. That is Stage 2.

  • Maintains lumbar lordosis during seated work hours
  • Passive — no adjustment required during use
  • Used during the working day — no session, no timer
£34
How daily support works →
14-Day Guarantee Full refund if LordoSet does not maintain lumbar curvature under sustained seated load as specified — no inspection, no forms.
ThermoFlux — Section 2: System Orientation
The Compression Chain — Phase 2

Your VerteSync Pro session reverses what the desk creates. Not the eight hours before it.

The Compression Chain operates across three physiological phases — each occurring at a distinct point in the working day. Your VerteSync Pro session addresses Phase 3: structural decompression — traction, heat, and vibration working simultaneously in fifteen minutes.

Phase 2 runs continuously while you sit.

Prolonged sitting progressively restricts peripheral blood flow. Research published in peer-reviewed physiology journals documents a significant decline in lower-limb vascular function beginning at two hours of uninterrupted sitting — a reduction that persists for the full duration. The desk creates this restriction. The session reverses the structural damage. The interval between is what ThermoFlux addresses.

How ThermoFlux maintains circulation

ThermoFlux uses dual-wavelength photobiomodulation — 660nm red light for superficial vascular tissue and 850nm near-infrared light penetrating up to 30–40mm — to stimulate nitric oxide release in the vascular endothelium. This produces vasodilation in lumbar musculature during the hours when prolonged sitting progressively restricts peripheral blood flow. The mechanism operates continuously while worn. It does not decompress. It does not release muscle guarding. It does not replace your VerteSync Pro session. It preserves the conditions between sessions.

ThermoFlux — Section 3: Mechanism Extension
Mechanism Extension

Same mechanism. Different phase. Different duration.

Mechanism continuity

Your VerteSync Pro uses targeted heat at 40–45°C to increase lumbar blood flow during structural decompression. ThermoFlux applies the same mechanism — photobiomodulation-driven vasodilation at lumbar tissue depth — continuously during desk hours. Same mechanism. Different phase. Different duration.

Time gap

Blood flow in the lower limbs declines within two hours of sitting. Your session reverses structural damage. ThermoFlux covers the interval the session cannot reach: the desk hours during which circulation restricts between sessions.

Mechanism comparison
Evidence basis

Peripheral endothelial function declines measurably within two hours of uninterrupted sitting, with progressive reductions in anterograde blood flow documented in peer-reviewed vascular physiology research. Near-infrared light at 850nm penetrates up to 30–40mm into lumbar tissue — reaching muscles, joints, and connective tissue at the depth where microvascular restriction occurs during prolonged sitting. At this depth, photobiomodulation stimulates nitric oxide release in the vascular endothelium, driving vasodilation in the compressed lumbar tissue. This is not surface warming. The mechanism operates at the same anatomical layer where the Compression Chain's Phase 2 damage accumulates. ThermoFlux applies it continuously during desk hours; your VerteSync Pro session applies it acutely during recovery.

ThermoFlux — Section 4: Product Specifications
Product Specifications

What ThermoFlux is. What it does. What it does not.

Technical specifications
Mechanism Dual-wavelength photobiomodulation
Wavelengths 660nm (surface · 2–5mm) · 850nm (deep tissue · 30–40mm)
Heat mode Continuous low-intensity — passive during wear
Effect Vasodilation — lumbar circulation support during sitting
Light modes Red · Near-infrared · Combo
Worn during Desk hours — passively, while working
Session 15–20 min per cycle · auto shut-off
Target area Lumbar region
Method Wraps around lower back · hands-free
Intensity Adjustable via wired controller
Material Neoprene · flexible · sweat-resistant
Fastening Adjustable Velcro straps
Weight Approx. 800g
Power Rechargeable battery · wireless
Not for Structural spinal decompression
Not for Acute pain treatment or symptom masking
Not for Muscle guarding release
Not for Replacing VerteSync Pro sessions
Protocol integration
How ThermoFlux fits your system
Phase Phase 2 — Circulation Maintenance
When During desk hours — before and between VerteSync Pro sessions
Function Maintains lumbar circulation during the hours the session cannot cover
Relation Passive support layer — worn during work, not during VerteSync Pro session
Primary VerteSync Pro remains the primary intervention. ThermoFlux does not replace it.

VerteSync Pro addresses Phase 3 — structural decompression in a 15-minute session. ThermoFlux addresses Phase 2 — circulation during the desk hours that precede and follow that session. Neither covers the other's phase.

In the box
  • ThermoFlux wearable lumbar belt
  • Wired smart controller
  • USB power cable
  • AC power adapter (UK plug)
  • User manual
  • Compression Chain reference card
Usage note

For optimal light penetration, use on clean, dry skin. If you are pregnant or have an acute nerve condition, consult your GP before use. ThermoFlux is not a medical device and is not intended to diagnose, treat, cure, or prevent any medical condition.

ThermoFlux — Section 5: Social Proof
System Validation

From people who use both.

The examples below are illustrative, based on common patterns among VerteSync Pro customers who added ThermoFlux to their daily protocol. Roles, pain durations, and quotes are generalised — these are not individually attributed or verified testimonials.

  • Illustrative image: a professional seated at a home office desk during working hours

    Project Manager

    Remote · 2 years of desk pain

    VerteSync Pro + ThermoFlux — System User

    I'd already tried a heat pad and two physio courses. ThermoFlux with the VerteSync Pro is different — by week two my afternoons were consistently better than before.

  • Illustrative image: a professional working at a desk in a home office environment

    Software Analyst

    Hybrid · 18 months of desk pain

    VerteSync Pro + ThermoFlux — System User

    Heat pads never lasted past lunchtime. By the end of week one, wearing ThermoFlux during desk hours and using the VerteSync Pro each evening felt like a complete system.

ThermoFlux — Section 6: System Completion Frame
System Completion

Your Compression Chain. Completed.

Phase 3 is covered. Phase 2 is the only remaining open variable. ThermoFlux addresses circulation during desk hours — the interval your VerteSync Pro session cannot cover.

Without ThermoFlux
Compression Reduction AxialLift — during desk hours
Circulation Maintenance Desk hours — not covered
Structural Decompression VerteSync Pro — 15-min session
With ThermoFlux
Compression Reduction AxialLift — during desk hours
Circulation Maintenance ThermoFlux — desk hours covered
Structural Decompression VerteSync Pro — 15-min session
ThermoFlux — Section 7: Offer Block
Glimnix Compression Chain Phase 2 of 3

Glimnix ThermoFlux — Phase 2 Circulation Maintenance

£59.00 Free UK tracked delivery included

Phase 3 is yours. ThermoFlux closes Phase 2. Your Compression Chain is complete.

What's included
  • ThermoFlux red light therapy belt — 660nm / 850nm dual-wavelength LED wrap
  • Wired smart controller — adjusts light mode, intensity, and session timer
  • USB power cable and AC adapter (UK plug)
  • User manual with safety instructions and recommended usage schedule

Not a second product. The remaining phase of the system you already started.

Complete My Protocol £59.00

30-day verification · Free UK delivery · No forms, no return required

ThermoFlux — Section 8: Guarantee

Same guarantee. Same commitment.

Try the ThermoFlux for 30 days. If you don't notice a meaningful difference in how your circulation holds during desk hours — contact us.

We'll refund your full purchase price. The device is yours to keep.

  • No forms
  • No return required
  • The device is yours to keep
  • Refund to original payment method within 7–10 business days
What to expect

ThermoFlux maintains circulation during desk hours — the signal is consistency, not a single moment. Most users notice the difference in the mid-afternoon across the first two weeks of consistent wear. The full effect of daily use accumulates over 3–4 weeks. By day 30, you will have a clear picture of what it does for your working day.

The same terms as your VerteSync Pro guarantee

Glimnix LordoSet — Section 5: Silent Objection Resolution
Before you add it

Four questions, answered.

  • No. LordoSet is a support pillow. It works passively throughout the working day — no active session, no fixed schedule required. The VerteSync Pro is a therapeutic system that works in a 15-minute active session at end of day. Different functions, different time slots, no overlap.

  • Every lumbar pillow you have tried was designed to fill the space between your back and the chair. That is a contact problem. What happens after two or three hours of sitting is a fatigue problem — the muscles that hold your lumbar curve stop doing so, and the curve flattens regardless of what is behind it.

    LordoSet is built to address the fatigue stage specifically. Its structured foam does not compress flat under sustained load the way standard pillows do. That is the functional difference — not the shape, not the materials label.

  • Yes, for standard desk chairs — including mesh-back task chairs, foam-seat office chairs, and upholstered chairs with a flat backrest. LordoSet attaches to the chair backrest via an adjustable strap and stays in position throughout the working day. No tools required.

    Not designed for chairs with a pronounced built-in lumbar curve, saddle chairs, or kneeling chairs.

  • Contact us within 14 days of purchase. You will receive a full refund. No inspection, no forms. This is the same guarantee that applies to all Glimnix products.

Glimnix LordoSet — Section 6: Purchase Commitment
Glimnix LordoSet mounted on a desk chair — Stage 2 Maintenance layer in daily use

The complete protocol

Stage 2 covered. Stage 3 covered. Both layers of the compression chain addressed.

Stage 2 is now in place. The pillow keeps the lower spine in position through the working day. The VerteSync Pro handles the recovery session. Both ends of the daily cycle are covered.

£34

Less than a single physiotherapy session. Maintains what the session restores.

14-Day Guarantee If LordoSet does not deliver as part of your daily protocol, contact us within 14 days for a full refund. No inspection, no forms.

LordoSet + VerteSync Pro. The working day and the recovery session. The Glimnix protocol, complete.

UK delivery Secure checkout Ships in 5–7 working days